Equipped with 300 high-quality LEDs across 5 wavelengths (630nm, 660nm, 810nm, 830nm, and 850nm), this device ensures optimal light penetration and consistent photon energy delivery for effective therapy outcomes and extended lifespan.
The intelligent application program empowers users to comprehend instructions easily, for personalized customization of photon mode, power level, pulse frequency, timer settings, and default mode with the highest level of refinement.
This device incorporates a patented design that facilitates efficient heat dissipation for enhanced safety, reliability, and durability.
Classic Series BP300
| Shell Material | Aluminum Alloy |
| Voltage | 100 – 240V |
| Power Consumption | 390W |
| Product Size | 880 x 276 x 71mm (34.6 x 10.87 x 2.79″) |
| Net Weight | 11.8kg (26lb) |
| LEDs | 300pcs |
| Lens Beam Angle | 30 Degree |
| Wavelengths | 630nm + 660nm + 810nm + 830nm + 850nm |
| Irradiance | 160mW/cm2 @ 6″ 151mW/cm2 @ 12″ 130mW/cm2 @ 18″ 113mW/cm2 @ 24″ |
| EMF | 0 µT @ 3″ |
| Timer | 0 – 30 Minutes |
| Dimmer | 0 – 100%, the control for Red & NIR is separate. |
| Pulse Frequency | 0 – 10,000Hz, the control for Red & NIR is separate. |
| Photon Mode | Red, NIR, Red + NIR |
| Life Span | 100,000 Hours |
| Warranty | 3 Years |
Aluminum Alloy Body
The material exhibits exceptional thermal dissipation and durability, along with superior corrosion resistance in comparison to ordinary iron materials.
The application of frosted surface treatment enhances its scratch-resistant properties, resulting in a more refined and luxurious appearance.
Moreover, it stands out as one of the most recyclable and environmentally friendly materials when compared to its plastic counterparts.
Patented Heat Dissipation Techonology
The LEDs located near the power supply are typically more prone to higher temperatures, which in turn increases the risk of light failure and shortens their lifespan.
Our patented hydrodynamic heat dissipation technology ensures that the device maintains a moderate temperature throughout its operation, not only for a 30-minute session but also for extended periods up to an entire day. In conjunction with two silent built-in cooling fans and the design of cellular heat emission holes, effective air circulation and heat dissipation are facilitated.
Genuine Modular Design
The larger panels employ a genuine modular design, wherein multiple small LED light therapy panels constitute the larger panel. This configuration offers advantages such as cost-effectiveness and personalized after-sales service. In case of an LED malfunction, only the individual unit needs to be replaced rather than the entire physiotherapy red light panel. Particularly beyond the warranty period, this approach significantly reduces costs for users.
The entire internal structure adheres to the aim of modularity, allowing for easy replacement of all components by non-professionals following our instructional video.
Patented Front Protective Cover
We have specifically developed an acrylic panel with high transmission ability, as well as heat-resistant and water-proof characteristics. It can be cleaned conveniently.
This panel is utilized to cover the front of the device, effectively safeguarding all lenses and LEDs from dust, scratches, or damage. With no exposed lamps, it exudes a luxurious appearance with a sleek and seamless surface.
Integrated Frame Design
Thanks to our advanced heat dissipation technology, we are able to manufacture the frame with an integrated design, setting it apart from others. With no side holes, dust is prevented from entering inside from both sides, ensuring a cleaner environment for all internal components.
Additionally, there is ample space available on the sides for long and large customized logos.
High-quality LEDs
The LED chips are all from a reputable listed company, Epileds. These chips boast a larger size ranging from 38-45mil, no smaller chips like 30mil size, ensuring exceptional performance and robust stability.
Each chip is meticulously connected using two gold wires, while the implementation of copper holders for every LED unit further enhances operational stability.
Excellent Power Supply
The device features water resistance and exceptional stability, enabling it to efficiently convert electric current into the precise voltage, current, and frequency required for optimal performance. It also supports a comprehensive control system that encompasses Nogier frequencies and customizable pulse frequencies ranging from 0 to 10,000Hz.
Elaborate Circuits Layout
The design of each wire enables effortless insertion and removal, facilitating seamless component replacement. This not only enhances our sales service efficiency and customer satisfaction but also contributes to cost savings in the event of any unexpected issues or beyond the warranty period.
Round Corner Design
The design provides a softer tactile experience and enhances safety compared to a right-angled design.
Protective Feet
The rubber protective feet at the bottom and rear are specifically engineered to offer superior skid and collision protection.
No Protruding Screws
The design provides a softer tactile experience and enhances safety compared to a right-angled design.
Multiple Using Methods
1.Hanging on the door
2.Hanging on the wall
3.Stand with acrylic panel
4.Horizontal and verticle mounting with multi-functional mobile stand
Horizontal: one or two panels.
Vertical: one, two or four panels.
5. Use with versatile electric stand
The versatile electric stand allows for horizontal, vertical, and inclined hanging positions, with adjustable height.
Standard Package Inlcudes
1 x Light Therapy Device
1 x Remote Controller
1 x Power Cord
1 x Protection Goggles
1 x Door Hanging Kit
| Model Name | BP70 | BP210 | BP300 | BP560 | BP840 |
| Frame Material | Aluminum Alloy | ||||
| Input Voltage | 100 -240 V 50 / 60 Hz | ||||
| Rated Power | 350W | 1050W | 1500W | 2800W | 4200W |
| Power Consumption | 91W | 273W | 390W | 728W | 1092W |
| Lamp Dimensions | 322 x 216 x 71mm (12.7 x 8.5 x 2.79in) |
880 x 216 x 71mm (34.6 x 8.5 x 2.79in) |
880 x 276 x 71mm (34.6 x 10.87 x 2.79in) |
1159 x 415 x 71mm (45.6 x 16.3 x 2.79in) |
1717 x 415 x 71mm (67.6 x 16.3 x 2.79in) |
| Lamp Weight | 4.2kg (9.3lb) | 8.6kg (19lb) | 11.8kg (26lb) | 18.5kg (40.8lb) | 32kg (70.5lb) |
| Wavelengths (nm) | 630 +660 +810 +830 +850 | ||||
| LED Quantity | 70 | 210 | 300 | 560 | 840 |
| Chips Distribution | 7 +28 +4 +3 +28 | 21 +84 +12 +9 +84 | 30 +120 +15 +30 +105 | 56 +224 +32 +24 +224 | 84 +336 +48 +36 +336 |
| Lens Beam Angle | 30 Degree | ||||
| Irradiance | 150mW / cm² @ 6″ 125mW / cm² @ 12″ 111mW / cm² @ 18″ 87mW / cm² @ 24″ |
148mW / cm² @ 6″ 134mW / cm² @ 12″ 120mW / cm² @ 18″ 97mW / cm² @ 24″ |
160mW / cm² @ 6″ 151mW / cm² @ 12″ 130mW / cm² @ 18″ 113mW / cm² @ 24″ |
152mW / cm² @ 6″ 131mW / cm² @ 12″ 117mW / cm² @ 18″ 101mW / cm² @ 24″ |
164mW / cm² @ 6″ 155mW / cm² @ 12″ 139mW / cm² @ 18″ 126mW / cm² @ 24″ |
| EMF | 0 μT @ 3″ | ||||
| Cooling Fans | 1pcs | 2pcs | 2pcs | 4pcs | 8pcs |
| Sound level | ≤52dB @ 6″ | ||||
| Flicker Free | V | ||||
| Photon Selection | 1) Red + NIR; 2) Red; 3) NIR | ||||
| Timer | 0 – 30 Min | ||||
| Dimmer | 0 – 100% | ||||
| Pulse Frequency | 0 – 10,000 Hz | ||||
| Remote | V | ||||
| Protective Goggles | V | ||||
| Modular Design | X (Basal panel) | V | V | V | V |
| Cascading Design | V | V | V | V | V |
| Using Method | 1) Standalone 2) Tabletop stand |
1) Door hanging 2) Floor stand 3) Manual stand 4) Electric stand |
1) Door hanging 2) Floor stand 3) Manual stand 4) Electric stand |
1) Wall hanging 2) Floor stand 3) Manual stand 4) Electric stand |
1) Wall hanging 2) Floor stand 3) Manual stand 4) Electric stand |
| Best For | Targeted areas | Half body | Half body | Full body | Full body |
| Lifespan | 100,000 Hours | ||||
| Warranty | 3 Years | ||||